It's for Charity

Hello everyone along with doing this blog im also a member of 40k Radios forum (as littleman_2009 funny that), so over the last few months the Freebootaz have been building 3 IG forces to sell for charity.

So i have done some of the Ultramarine PDF force and would really like it if anyone who reads this would help by bidding on the following auctions.

http://www.ebay.com/itm/110797023817?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

http://www.ebay.com/itm/110797012629?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

http://www.ebay.com/itm/110797014417?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

http://www.ebay.com/itm/110797016162?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

http://www.ebay.com/itm/110797017892?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

http://www.ebay.com/itm/110797019272?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

http://www.ebay.com/itm/110797021082?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

Thank you for taking the time to look and bid if you have lets see if we can get the fund raised up high for the charity http://www.toysfortots.org/. The next post should be me finishing the Tank.
Merry Christmas and a Happy New Year to you all were ever you are.   

Back on Track(s) Pt2

Okay so over the last week i have worked on painting my DKoK tank, i put together last time so here is what i have so far.
I used a basecoat of Knarloc Green this was applied by Airbrush (this was after i put on 3 coats of the wrong green ooops)

So at this point i get so stuck into painting that i forget to take pictures (sorry about that). So here is what i did to break up the big lump of green so i first painted the tracks, engine cover and the barrel with chaos black. At this stage i added the transfers (Decals). I next started by stippling on some Denab stone followed by chaos black, i had before just done chaos black but after picking up the Imperial Armour Masterclass book again it suggests using a sponge to give rough edges to the tank (the most worn parts) i tried this and it did not work very well and found the stippling brush to work better, i added some stippled Knarloc green over the transfers to give them a chipped look too.

You may have noticed at this point the bullet holes up the tank i decided to add these to try and give a look of action, no tank is getting over a battlefield without someone taking a shot at it

   From here i tried out the rain streaking effect from the masterclass book, had some success but i need to try it again, before you do this it tells you to coat in a matt varnish to pull together all the colors. So this was done by taking burnt umber oil paint (this i got from my local hobby shop) and thinned it with white spirits (turpentine or whatever it gets called in your part of the world) and put on all the panel gaps and were there are rivets, the stuff runs all the way round very quickly much faster than a GW wash this is also what gives the gun barrel the oiled look, to get the rain streaked look is to pull a large drybrush over it (i use a large tank brush again ooops).

I last tried to give it some rust stains, again this used the same burnt umber oil paint with only a little thinning down and it had added to it some rust weathering powder (i made my own from orange and brown chalk pastels) i then applied it with a old toothbrush by flicking it on the side of the tank and using my Airbrush to spray on some white spirits to the model (remember when doing this the rust patches will blow away from you so direct you airbrush well.   

So this is were im at currently i still need to to paint the engine, exhast pipes, barrel and many other details. but i think that should be it for the weathering as i dont want to over do it so what do people think so far to much or not enough? Thanks for taking the time to read this.        

Get back on Track(s) Pt1

Okay so after the the dodgy title pun lets move on. so this post is the first part of my next work Leman Russ Battle tank so here is what you get in the box.

So for those who have not used Forge World resin before it normally needs a clean, for me this involves stealing the washing up liquid from the kitchen, filling the sink with some lukewarm water and scrubbing with a toothbush, there is also large pieces of flash to remove i personally use clippers and my knife to smooth it out.
So in the end i ended up with what is pictured below i have tried to give myself as many options as possible and will look into magnatizing it all but this would be the first time

One of the fun parts about Forge World kits is the lack of instructions (but lets face it if i did have full instuctions i would probably not follow them). So in the next part i will paint the basic tank for the 11th tank company, with as much detail as i can.

I also got a Apocalypse game in today it was a 6000pts a side game, i put out 3000pts DKoK on my side was 1500 eldar and 1500 blood angles vs 2000 orks and 4000 necron. My Warhound Titan, Shadowsword and Stormblade didn't do much but attract fire (surprise) but necron weapons in this hurts and 10 scrab bases can eat thorogh a superheavy tank in 1 round of combat the unit that did the best for me was my 4 heavy mortars which kill a fair few models, but we only ended up with time for 3 turns i lost 0 guardsmen yes i did say i lost 0 guardsmen in an Apocalypse game (the Stormlord stopped a load of their shooting).
So for me going forward i will be buying more Heavy Mortars and Quad lancher.        

Transmission Interrupted.........

Okay so i have been away from my blog for a while as i have been off doing stuff with my Grey Knights at Warhammer Worlds Planetary Empires Campaign last week, so Mordrak and his Ghost Knights have taken to the field and ended with a record of 4 wins and 1 draw and much fun was had.

So getting back to the DKoK i have a FW Russ to build along with 4 heavy mortars and many many models to paint, i have told all my friends that the Grey Knights only come out now when i need a codex list, the reason for this is that me and my friends are looking to attend the Imperial Armour Warmarch next year, and i need to get in games and paint the whole army along with any other models i buy over the coming year.

Right first off im going to work on putting some of these things together so over this weekend i will try to put up some pictures of putting together the Russ and maybe a painted unit of troops

Breaching Drill

 Okay so 2 post in less than 24hrs whats going on, i had some time on my hands. Now the Breaching drill was bought a while ago put together and primed but that was it so it was about time i got to it.

So a simple application of codex gray as this was the colour of the armour for the engineers so i wanted them to tie together

so the Blades and pistons were done with boltgun metal and the belt was done with Charadon Granite

 then the blades were washed with Delvan mud and the tracks with badab black

I then picked out the rivets with the delvan mud after that dried i then cover the rest with the same wash the rivets stay visable, i added the transfers (death korps ones) and using chaos black and a stippling brush i went along the straight edges of the drill and use a pencil along the same straight lines to give it the rubbed and scrapped metal look, i then used codex grey and put it over the transfers with the stippling brush, to give a worn effect.  

Then using Forge Worlds Dried mud weathering powder. This was applied by putting White spirt (this has a different name in the states not sure what) on the blades and the powder was dabbed on to the blades then i with what was left on the brush brushed the surrounding area

Anyway i hope you like the result here is a quick video to 

Feedback needed

Okay so people are at least looking at this blog but i need feedback so i can tailor what im doing and writing to appeal, so what would people that look here want to see going forward, should i do tutorials on what i put together and paint. As it is i have alot to paint and many other things to put together before i can start getting games in with them but once i do i will start some battle reports going forward.

So thank you for taking the time to look here in the first place, any comments and ideas you can give will be greatly recived again Thank You.   

310th Engineers Squad

Okay so hello again if anyone is out there i painted some of the Engineers today thought i would show the result. And if anyone wants to know why i have a squad then they have never seen the Breaching drill, anyway hope you like.

11th Tank Reg 1st Fast Company "Stormcrow's"

Okay in thanks for being the first to sign up (and as i was struggling to think of a name) i have given this Company the name "Stormcrow's". So this will be one of the few models that is not FW model, here is were im at with it. I will be adding a Death Korps tank Commander, then some rust and weathering.

Stormblade 12th tank of the 11 Tank Regiment

So i have never been that good with tanks so having to paint a load of tanks has made me pick up the Imperial Armour masterclass. I had a play with another tank before i painted this one although there are some finer details to do im happy with how it has gone so far so here are a few pics.

 

The Start

Hello out there, so i have been trying to give my Death Korps some history and background and on looking through the 3rd book of Vraks i found a list of the differant Korps, one of which was the 11th Assualt Korps.

The 11th Assualt Korps is made up of the following:

11th tank regiment (transfered from the 8th Assualt Korps)
61st tank regiment
66th tank regiment

101st Siege Regiment

497th Siege Artillery regiment

so any thing in green is to be a regiment i will paint for the force. So im not the best painter but not the worst i have a tendancy to be lazy. So all i ask of anyone who comes here is constructive comments please im happy with joking and banter but will not take abuse. 

Thank you for your time
P.S. here is what i have built up so far